Undercarpet heating bed set 1,2 Kw

Description

Undercarpet heating bed set

Size/Dimensions:
Per L-S unit: 0.9mt x 2.6mt x 1.6mt
The set is 1.2 kW in Total (600watts per side)

About our Undercarpet heating bed set.

Description: The heating mats go on either side of the bed and therefore will make a U-shape around the bed.

Do’s and don’ts: Do not put  Undercarpet heating bed set under any flat-based furniture as putting the heating under flat-based furniture could block the heat and discolour your carpet.

What about smaller rooms or children’s rooms? Children’s rooms and small rooms, with one or two single beds, can use one side of the L-S heater and therefore only one side of the unit needs to be purchased.

Undercarpet heating bed set. How does the installation work?

Undercarpet heating bed set is put on top of the underfelt and therefore sits directly beneath the carpet. under the carpet, heating mats can be put under a stretch carpet (wall to wall) or under any loose laid rug. To clarify you must use a minimum of 1000 grams under felt with under carpet heating.

What carpeting should be avoided? Rubber-backed carpets and hemp/natural fibre carpets.
Should you have any queries regarding the type of carpet you are going to heat, give us a call or pop us an e-mail and we will gladly give you advice.

What is undercarpet heating made from?

Undercarpet, heating is made from Teflon-coated heating elements that are placed in an industrial-strength aluminium foil.

Can the units catch fire? The units won’t catch fire as they have a built-in earthing block. Thus if there is any problem with the heating, it will trip the power at the D.B. board and prevent any possible fire danger. Hence they are incredibly safe to use.

You will find our office at 111 Karavas Court. Beyers Naude Drive. Randburg. Johannesburg

Undercarpet heating is a modern and efficient way to keep your floors warm and comfortable during the winter months. It is ideal for those who are looking for a cost-effective and energy-efficient way to heat their homes.

The first step in installing Undercarpet heating bed set is to lay out the undercarpet mat. This is a vital part of the process, and it is essential to do it correctly to ensure that the system works efficiently. The undercarpet mat is placed directly on the subfloor and provides a heat-resistant layer for the heating cables.

When laying out the undercarpet mat, it is vital to ensure that it is installed correctly. The mat should be cut to fit the size of the room and laid out systematically, ensuring that there are no gaps or overlaps. It is also essential to consider the location of the thermostat and the heating cable when laying out the undercarpet mat.

One of the most important aspects of installing  Undercarpet heating bed set is securing the mat in place. This ensures that the mat stays in place, provides even heat distribution and prevents damage to both the mat and your carpeting. Fortunately, securing an undercarpet heating mat is a relatively simple process that can be accomplished by just about anyone with a bit of patience and a few basic tools.

To start, you’ll want to ensure that the area where you plan to install the undercarpet heating mat is clean, dry, and free of debris. Next, position the mat in the desired location and use masking tape to hold it in place temporarily. Then, using a carpet knife or utility knife, carefully cut into the carpeting along the edges of the mat, creating a hole through which you can insert the mat.

Once you have the mat in place, use a staple gun or hammer tacker to secure it to the subflooring. Be sure to space the staples or tacks evenly and avoid placing them too close to the edge of the mat, as this can cause the mat to tear or become damaged over time.

In conclusion, undercarpet heating is an excellent way to keep your home warm and comfortable during the winter months. By taking the time to secure your heating mat properly, you can ensure that it lasts for years to come and provides reliable heat to your home.